Troubleshooting - URSUS TROTTER UT-HIDROXPERTEN Manual De Usuario

TROUBLESHOOTING

DANGER Risk of electric shook.
Turn off the appliance and remove the main plug prior to performing any care and maintenance work.
Repair work and work on the electrical components may not only be performed by an authorized
customer service. You can rectify minor faults yourself with the help of the following overview. If in
doubt, please consult the authorized customer service.
SINTOMA
Machine refuses
to start.
Fluctuating pressure
Machine stops
Machine pulsating
Machine starts, but no Pump/hoses or accessory frozen
water comes out
ACCESSORIES
A choice of accessories is supplied in the scope of the delivery of this product. Please check the
technical specification of any accessories that you purchase to ensure they are compatible with this
product.
Machine not plugged in
Defective socket
Fuse has blown
Defective extension cord
Pump sucking air
Valves dirty, worn out or stuck
Pump seals worn out
Incorect mains voltage
Thermal sensor activated
Nozzle partially blocked
Air in inlet hose
Inadequate supply of mains water
Nozzle partially blocked
Water filter blocked
No water supply
Clean the filter /Clean the nozzle
CAUSA
Replace fuse. Switch off other machines
Check the mains voltage corresponds
trigger until regular working pressure
Check that the water supply corresponds
Hose kinked Avoid using long, thin hoses (min.1/2")
Water filter blocked /Nozzle blocked
ACCION RECOMENDADA
Plug in machine
Try another socket.
Try without the extension cord.
Check that hoses and connections
Clean and replace or refer to
local distributor.
Clean and replace or refer to
to specifications on the model tag.
normal se reanude.
Leave the washer for 5 minutes
Clean the nozzle.
Allow machine to run with open
to specifications required.
Clean the nozzle/ Clean the filter
Straighten out hose.
Wait for pump/hoses or accessory
to thaw. Connect inlet water.
are airtight.
to cool down.