URSUS TROTTER UT-HIDROXPERTEN Manual De Usuario página 16

Hidrolavadora 3 en 1
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

ASSEMBLY
Mount loose parts delivered with appliance prior to
start-up
1. Installing the handle with screw
2. Slide the trigger gun hook into position
3. Installing the dust compartment into position
4. Installing the spray wand to trigger gun.
• Fit the spray wand into the gun and rotate it until
the two parts are completely locked.
5. Connect the high pressure hose to the trigger gun
• Connect the sliver end of the high-pressure hose
to the trigger gun and twist the nut as indicated to
secure the connection.
6. Connect the high-pressure hose to the water
outlet
• Connect the other end of the high-pressure hose
to the water outlet on the washer and twist the
black rotatable end-piece as indicated to secure the
connection.
7. Connect the garden hose to the water inlet
• Connect the garden hose adaptor(female coupler)
to the water inlet of the pressure washer, then
thread your garden hose(male end) into the garden
hose adaptor.
START UP
Park the appliance on an even surface.
Insert the mains plug into the socket.
Pressure washer.
ATTENTION
Impurities in the water can damage the high-
pressure pump and the accessories.
Water supply from mains
Drawing in water from the open reservoirs
This high-pressure cleaner is suited to work with
the YILI suction hose with backflow vale to draw in
surface water, e.g. from water butts or ponds.
Fill the suction hose with water.
Screw the suction hose into the water connection of
the appliance and insert it into the water source (e.g.
rainwater drum).
Bleed the device as follows prior to operation:
• Turn on the appliance power switch.
• Unlock the lever of the trigger gun.
• Push the lever of the trigger gun, the device will

Hide quick links:

Tabla de contenido

Solución de problemas

loading

Tabla de contenido