Make sure that the machine is not live when carrying out maintenance work on the motor.
These machines have been designed to operate over a long period of time with a minimum of
maintenance. Continuous satisfactory operation depends upon proper machine care and regular cleaning.
Cleaning
Keep the ventilation slots of the machine clean to prevent overheating of the engine. Regularly clean the
machine housing with a soft cloth, preferably after each use. Keep the ventilation slots free from dust and
dirt. If the dirt does not come off use a soft cloth moistened with soapy water. Never use solvents such as
petrol, alcohol, ammonia water, etc. These solvents may damage the plastic parts.
Lubrication
The machine requires no additional lubrication.
Faults
Should a fault occur, e.g. after wear of a part, please contact the service address on the warranty card.
Do not dispose of electric tools, accessories and packaging together with household waste material
- in observance of European Directive 2002/96/EC on waste of electric and electronic equipment and its
implementation in accordance with national law, electric tools that have reached the end of their life
must be collected separately and returned to an environmentally compatible recycling facility
Fault Symptom
1
Out of service
2
Insufficient running
3
Running noise frequently
4
Drill chuck in loosening
Failed to reach full charging
5
capacity
Spare parts list and drawing
6
Cordless drill/driver MPCD14VDQF/2 User Manual
CLEANING AND MAINTENENCE
ENVIRONMENT
TROUBLE SHOOTING
Insufficient charging capacity in
accumulator
Accumulator damage
Motor wearout
Switchboard damage
Insufficient charging capacity
Damage in gear wheel
Motor wearout
Wearout of motor gear wheel
Fracture in gearing box
Drill chuck in wide loosening
Disconnection between plug and power
socket
Shortcircuit in supply power
Fuse blowout or damage in electricity
charger
Accumulator damage
Possible Cause
GB
Troubleshooting
Replace fully recharged
accumulator
Replace accumulator
Replace electric motor by
repairer
Replace switchboard by repairer
Replace fully recharged
accumulator
Replace gear wheel by repairer
Replace electric motor by
repairer
Replace gear wheel by repairer
Replace gearing box by repairer
Replace drill chuck by repairer
Put plug in power socket
Repair supply power
Repair or replace electricity
charger
Replace accumulator battery
Please download files on
www.maxpro-tools.com
10
