oneConcept CTR-1 Manual Del Usuario página 20

EN
OPERATION
Insert the plug into the socket. Make sure that it is firmly seated in the socket.
ON/OFF button: Press the ON/OFF button to turn on the device.
SPEED button: Press the SPEED button to set the desired speed (low/
medium/high).
VANE button: Press the VANE button to increase the blowing area around the
unit. The cooling air is then blown out in a larger radius. As long as the function
is active, the corresponding indicator light is illuminated. Press the VANE
button again to deactivate the function. The corresponding control lamp goes
out. Move the fins at the air outlet up or down to adjust the vertical blowing
angle even more precisely.
TIMER button: Press the TIMER button several times to set the off timer
between 0.5-9 hours. The corresponding light for the selected time level will
illuminate.
MODE button: Preset mode is NORMAL. Press the MODE button several
times to change the wind setting as follows: NORMAL > NATURAL > SLEEP
MODE. While one of the modes is active, the corresponding indicator light is
on.
COOL button: If the tank is empty or there is not enough water in it, the
corresponding indicator light flashes as soon as you press the COOL button.
Before using the cooling function, make sure that the outlet valve of the water
connection is firmly closed and place the cooling pad in the freezer for 1-2
hours. Put the frozen cooling pad and clean water into the tank, making sure
that the water level is between the MIN and MAX marks. Then secure the tank
in the unit and press the COOL button. The corresponding indicator light will
turn on and the unit will begin blowing out cooler air. Press the COOL button
again to stop the cooling function.
If the air is still not cold enough for you during the cooling function, you can
add additional ice cubes to the ice compartment in the tank by simply opening
the tank cover. Do not overfill the ice compartment, otherwise the unit may be
damaged.
20