Idiomas disponibles
Idiomas disponibles
6. Press and hold the oxygen sensor's push button for 3
seconds. You will see that the oxygen concentration
that appears on the module window changes to the
concentration
temperature.
7. If you are in the "% in dissolved" mode, wait until you
do not see any change in the oxygen percentage.
This means that you pumped the maximum amount
of air into the water (in the specific temperature you
are working in).
8. Press and hold the oxygen sensor's push button for 3
seconds. You will see that the oxygen percentage
that appears on the module window changes to
100%.
9. When the oxygen concentration/percentage has
stabilized, it means that all excess oxygen has come
out of the water (as shown in the following graph).
V2018.01
21
that
correlates
Home
to
the
water
English
