Página 1
FWY43 Linkable, Removable Toys • Fit the link on each toy to a loop on the seat. Juguetes que se pueden conectar y quitar • Conectar el aro de cada juguete en una conexión en la silla. Placing and Removing Baby •...
Página 2
• To clean the frame and toys, wipe clean using UNITED STATES a mild cleaning solution and damp cloth. 1-800-432-5437. Fisher-Price, Inc., Do not use bleach. Do not use harsh or 636 Girard Avenue, East Aurora, NY 14052. abrasive cleaners. Rinse clean with water Hearing-impaired consumers: to remove soap residue.
Página 3
Consumer Information Información al consumidor WARNING To prevent serious injury or death: • Fall Hazard – Never use on any elevated surface, since child’s movement may cause the product to slide or tip over. Use only on a floor. • Suffocation Hazard – Never use on a soft surface (bed, sofa, cushion), since the product can tip over and cause suffocation in soft surfaces.
Página 4
Assembled Parts Piezas ensambladas Front Base (2 pieces) Rear Base (2 pieces) Base delantera (2 piezas) Base trasera (2 piezas) Seat Ring Aro del asiento Colchón Colchón 2 Frames 2 Caps 2 armazones 2 tapones IMPORTANT! Before assembly and each use, ¡IMPORTANTE! Antes del montaje y de cada inspect this product for damaged hardware, uso, revisar que el producto no tenga piezas...
Página 5
Assembly Montaje • “Snap” the front base pieces together. • Ajustar las piezas de la base delantera. • “Snap” the rear base pieces together. Hub Button Out • Ajustar las piezas de la base trasera. Botón de conexión hacia afuera Hub Button Out Botón de conexión hacia afuera...
Página 6
Assembly Montaje PUSH EMPUJAR PUSH PUSH EMPUJAR EMPUJAR • Lift the frames until each “snaps” into place. • Push the frame near a seat ring peg to “snap” the seat ring into place. • Subir los armazones hasta que cada uno se Hint: If you cannot “snap”...
Página 7
Assembly Montaje • Fit a cap onto each frame. Fit the wide tab on the cap to the wide notch in the frame and the narrow tab on the cap to the narrow notch in the frame. TOP VIEW • Push to “snap” in place. VISTA DE ARRIBA •...
Página 8
Assembly Opening the Frame Montaje Abrir el armazón • Lift the frames until each “snaps” into place. Push down on the seat ring to be sure the frame is open. • Insert and “snap” the pegs on the pad into the holes in the front base.