Install The Battery Pack; Remove The Battery Pack; Operation; Start The Machine - GreenWorks WLG301 Manual Del Operador

6.2

INSTALL THE BATTERY PACK

WARNING
• If the battery pack or charger is damaged, replace the
battery pack or the charger.
• Stop the machine and wait until the motor stops before
you install or remove the battery pack.
• Read, know, and do the instructions in the battery and
charger manual.
1. Align the lift ribs on the battery pack with the grooves in
the battery compartment.
2. Push the battery pack into the battery compartment until
the battery pack locks into place.
3. When you hear a click, the battery pack is installed.
6.3

REMOVE THE BATTERY PACK

1. Push and hold the battery release button.
2. Remove the battery pack from the machine.
7

OPERATION

WARNING
Do not use any attachments or accessories not
recommended by the manufacturer of this product.
7.1

START THE MACHINE

English
1. Push the on/off button.
7.2

STOP THE MACHINE

1. Release the on/off buttton.
7.3

ADJUST THE ANGLE

1. Turn the top head of the mahicne to adjust the light angle
(0-135°).
8

MAINTENANCE

Remove the battery pack from the machine before
maintenance.
Do not use strong solvents or detergents on the plastic
housing or components.
8.1

CLEAN THE MACHINE

The machine must be dry. Humidity can cause risks of
electrical shocks.
• Clear the unwanted material out of the air vent with a
vacuum cleaner.
• Do not spray the air vent or put the air vent in solvents.
• Clean the housing and the plastic components with a
moist and soft cloth.
9

TECHNICAL DATA

Voltage
Lumens
Run time (2 Ah)
Rotation angle
Weight without battery
Battery model
Charger model
The recommended ambient temperature range:
7
WARNING
WARNING
CAUTION
24 V
220 lm
Up to 20 hours
135°
0.60 lbs ( 0.27 kg)
LB24A020 / LB24A040
CAG801 and other CAG series
EN