Idiomas disponibles
Idiomas disponibles
ENGLISH
SET UP & USE
CONTROL PANEL
/SPEED: The key serves two purposes. To turn fan ON and OFF and to set desired
speed. Press key to turn fan ON for LOW speed. Continue to press the key to scroll
through the SPEED settings. The corresponding LED light 1 (Low), 2 (Medium) and 3
(High) will illuminate to indicate the selected speed.
TIMER: When this button is pressed the auto shut-off timer can be set up to 7.5
hours. Continuing to press will allow you to scroll though the different time selections
of .5, 1, 2 & 4 hours. The combination of selections will be indicated on the control
panel by illuminated LED lights. The fan will automatically shut-off after the selected
duration. If no lights are illuminated the fan will run continuously.
MODE: Pressing the "MODE" button will set the fan to NORMAL, NATURAL, or
SLEEP mode.
•
The default mode is NORMAL and provides a steady air flow.
•
NATURAL mode cycles through low, medium and high fan speeds.
•
SLEEP mode gradually cycles from high to low speeds.
The
(Normal),
OSC: Pressing the 'OSC' button will start and stop the oscillation function.
Page 10
(Fig. 9)
(Natural), and
(Sleep) will illuminate to indicate the selection.
Fig. 9
