Idiomas disponibles
Idiomas disponibles
To turn the unit off
Press and hold PWR for more than 2 seconds.
If you press this button for less than 2 seconds,
it functions as MUTE.
Note
The unit turns on in the last mode selected when
you turned off the unit.
LO (local/DX) button
You can use Local mode when you wish to tune
in only strong stations during seek tuning. In
Radio mode, press LO to select Local mode. The
"LO" indicator lights up.
• Press LO to cancel Local mode and switch to
DX (distance) mode.
• The "ST" (stereo) indicator lights up when the
tuned-in station is broadcasting in stereo and
the reception is good.
FUNC (function) button
Each time you press FUNC, the unit switches
to one of the following modes, in cyclic order.
FM1 FM2
FM3 AM1
* Tape Play mode (available while a cassette is in
the unit)
PRESETTING STATIONS
To preset stations automatically
(Auto Memory)
1
Press PWR to turn the unit on.
2
Press FUNC repeatedly to select a
desired band from among FM1, FM2,
FM3, AM1, and AM2.
3
Press and hold A.ME/PS for more than
2 seconds to activate the automatic
presetting function.
This unit can store up to 6 stations in memory
for the preset station buttons 1 to 6 (with the
"LO" (local) indicator lit).
If the unit could not find strong stations, the
"LO" (local) indicator goes off, and a search
begins for weaker stations.
Use this function to automatically preset up to 6
stations each for FM1, FM2, FM3, AM1, and AM2
AM2
(up to a total of 30 stations).
• When the auto memory operation is completed,
the station assigned to preset station button 1 is
tuned in.
• To stop the auto memory operation, press A.ME/
PS again.
To check the preset stations (Preset Scan)
• If you wish to check the preset stations, press
A.ME/PS for less than 2 seconds. The preset
stations stored in memory will be tuned in for 5
seconds each in order.
• To stop this function, press A.ME/PS again or
press any of the preset station buttons 1 to 6.
continued
6
ENGLISH
CTX410(YU)-total-En-7
