Idiomas disponibles
Idiomas disponibles
Step 2. Adjust the flow control to
the lowest setting. Once the pump
has been turned on (after step 3)
you may adjust the flow control to
the preferred setting.
Step 3. Place the pump into the
water and connect to a properly
grounded electrical outlet.
SPECIFICATIONS
Pump
#52223
Max Flow Rate
330 GPH (at 0 ft.)
Max Pumping Height
7.2 ft. (at 0 GPH)
Power Consumption
27 watts / 0.4 amps
Cord Length
16 ft.
Flow Rates (GPH)
8
7
6
79
5
148
4
185
3
219
2
264
1
303
0
330
52223
Register your product online!
Use your smartphone camera
to scan the QR code or visit our
website totalpond.com/register
6
Visit WWW.TOTALPOND.COM for information and tips.
2
3
#52224
560 GPH (at 0 ft.)
9 ft (at 0 GPH)
42 watts / 0.6 amps
16 ft.
70
99
198
284
342
395
476
546
560
52224
Pumps
Before installing your pump please write down the following
information:
The 14 digit serial number located on the pump
___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
Item number:
Date of purchase:
______
___ /___ /___
item number
MAINTENANCE & TROUBLESHOOTING
Always disconnect units from the power source before
beginning any maintenance or work on the unit.
Regular cleaning of the pump may
be necessary depending upon
the environment in which it is
operated. Clean the pump when it
is visibly soiled or when a drop in
performance is detected.
Step 1. Remove the inlet screen.
Step 2. Remove the impeller cover
to expose the impeller assembly.
Remove the impeller assembly
by gently pulling on the impeller
blades. The impeller is held in place
by a manget
Step 3. Use a soft cloth or brush
and warm water to clean the
impeller, the inside of the impeller
housing and the rotor housing.
Step 4. Reassemble all pump
parts and place in water before
reconnecting to the power source.
Please call Customer Care before returning item to store: 1-888-412-6001
Pump date code:
____ /____
mm
yy
00000000000000
1
2
3
4
7
