Idiomas disponibles
Idiomas disponibles
OPERATION INSTRUCTIONS
Step 1. For maximum water flow,
use the largest tubing size. Trim the
tubing adapter using a hacksaw at
the location indicated.
NOTE: If you do not want to use the
largest tubing size, skip to Step 2.
Step 2. For item #52325 connect
the tubing to the outlet of the
pump. For item #52321 connect
the adapter to the pump, and
connect the tubing to the outlet
of the adapter.
NOTE: Tubing is not included.
Step 3. Place the pump inside the
pumpshield. Pull the drawstring
until the pumpshield is fully closed
around the tubing and power
cord. Tie a knot in the drawstring.
Step 4. Place the pump into the
water and connect to a properly
grounded electrical outlet.
SPECIFICATIONS
1200 GPH Waterfall Pump (#52325)
Max Flow Rate
1200 GPH (at 0 ft.)
Max Pumping Height
16 ft. (at 0 GPH)
Recommended
5 ft. (at 950 GPH)
Waterfall Height
Power Consumption
75 watts / 0.85 amps
Cord Length
16 ft.
2000 GPH Waterfall Pump (#52321)
Max Flow Rate
2250 GPH (at 0 ft.)
Max Pumping Height
17 ft. (at 0 GPH)
Recommended
10 ft. (at 1215 GPH)
Waterfall Height
Power Consumption
105 watts / 1.3 amps
Cord Length
16 ft.
6
Visit WWW.TOTALPOND.COM for information and tips.
1
Cut ring
Adapter before cut
Adapter after cut
2
#52325
#52321
3
4
GFCI
Outlet
Flow Rates (GPH)
16
220
15
420
14
130
590
13
220
780
12
330
950
11
435
1,080
10
550
1,215
9
660
1,310
8
752
1,426
7
825
1,532
6
890
1,664
5
950
1,770
4
1,010
1,849
3
1,065
1,940
2
1,113
2,034
1
1,160
2,134
0
1,200
2,250
52325
52321
Pumps
Register your product online!
Use your smartphone camera
to scan the QR code or visit our
website totalpond.com/register
Item number:
______
Before installing your pump please write down the following
information:
The 14 digit serial number located on the pump
___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___
Pump date code:
____ /____
mm
item number
MAINTENANCE & TROUBLESHOOTING
Always disconnect units from the power source before
beginning any maintenance or work on the unit
PUMPSHIELD
• Clean the pumpshield and (if necessary the pump) regularly
depending upon the environment in which it is operated. A
drop in water flow is an indication that your pumpshield and/
or pump require cleaning. The pumpshield not only protects
your pump but significantly reduces the need for pump
maintenance.
• Before cleaning, always disconnect the pump from the power
source.
• Remove any large debris from pumpshield. Use a garden
hose to rinse off any other dirt from the pumpshield.
Please call Customer Care before returning item to store: 1-888-412-6001
Date of purchase:
___ /___ /___
yy
00000000000000
7
