Idiomas disponibles
Idiomas disponibles
Step 1. For maximum water
flow, use the largest tubing size.
Trim the tubing adapter using a
hacksaw at the location indicated.
NOTE: If you do not want to use
the largest tubing size, skip to
Step 2.
Step 2. Connect the adapter to
the pump, and connect the tubing
to the outlet of the adapter.
NOTE: Tubing is not included.
Step 3. Place the pump inside the
pumpshield. Pull the drawstring
until the pumpshield is fully closed
around the tubing and power
cord. Tie a knot in the drawstring.
Step 4. Place the pump into the
water and connect to a properly
grounded electrical outlet.
3,600 GPH Waterfall Pump (#52323)
Max Flow Rate
Max Pumping Height
Recommended
Waterfall Height
Power Consumption
Cord Length
5,100 GPH Waterfall Pump (#52322)
Max Flow Rate
Max Pumping Height
Recommended
Waterfall Height
Power Consumption
Cord Length
6
OPERATION INSTRUCTIONS
SPECIFICATIONS
3600 GPH (at 0 ft.)
18.3 ft (at 0 GPH)
12 ft (at 1550 GPH)
170 watts / 2.5 amps
16 ft.
5100 GPH (at 0 ft.)
23 ft (at 0 GPH)
18 ft (at 1680 GPH)
230 watts / 2.5 amps
16 ft.
Visit WWW.TOTALPOND.COM for information and tips.
1
Cut ring
Adapter before cut
2
4
Flow Rates (GPH)
23
18
17
16
15
14
13
12
11
10
2009
9
8
2360
7
6
2648
5
2770
4
2900
3
3080
2
1
3480
0
3600
52323
Adapter after cut
3
GFCI
Outlet
0
1680
420
1960
660
2260
880
2550
1090
2770
1320
3020
1550
3230
1780
3410
3580
2210
3720
3870
2501
4020
4150
4320
4480
4660
3310
4830
5000
5100
52322
