Lenco DVP-9463BK Manual Del Usuario página 10

Auto Standby
This function is used to select auto standby settings after 3 or 4 hours.
3 HOURS: the unit will turn to standby mode after 3 hours if there is no interaction from user within this
period of time.
4 HOURS: the unit will turn to standby mode after 4 hours if there is no interaction from user within this
period of time.
OFF: the auto standby function is disabled, and unit will stay in "on" mode even if no interaction from
user.
Audio Setup Page
Downmix
This option allows you to set the stereo analog output of your DVD Player.
LT/RT: Select this option if your DVD Player is connected to a Dolby Pro Logic decoder.
Stereo: Select this option when output delivers sound from only the two front speakers.
Digital Output
The function is used to select the SPDIF Output: SPDIF Off, SPDIF/RAW, SPDIF/PCM.
SPDIF Off: Turns off the SPDIF output.
SPDIF/RAW: If you have connected your DIGITAL AUDIO OUT to a multi-channel decoder/receiver.
SPDIF/PCM: Only if your receiver is not capable of decoding multi-channel audio.
Dolby digital
The options included in Dolby Digital Setup are: 'Dual Mono' and 'Dynamic'.
Dual Mono
Stereo: The Left mono sound will send output signals to the Left speaker and the Right mono sound will
send output signals to the Right speaker.
L-Mono: The Left mono sound will send output signals to the Left speaker and the Right speaker.
R-Mono: The Right mono sound will send output signals to the Left speaker and the Right speaker.
Mix-Mono: The Left and the Right mixed mono sound will send output signals to the Left and the Right
speakers.
Dynamic
Dynamic range compression.
10