Idiomas disponibles
Idiomas disponibles
2. SAFETY
This range meters have been designed according to IEC1010 concerning electronic measuring
instruments with 600V CAT III and pollution 2.
This symbol indicates that the operator must refer to an explanation in the operating instruction
to avoid personal injury or damage to the meter.
Grounding
High Voltage
Double Insulation
Power Switch
CAUTIONS:
● Improper use of this meter may cause damage, shock, injury or death. Read this manual carefully
before you use it.
● Be sure to remove the test leads before replacing the battery or fuses.
● Check that the instrument and its test leads are in perfect condition before use.
● Do not apply voltages greater than 1000V r.m.s. between the common terminal and the ground.
● Be very careful when taking measurements. If voltages are greater than 30VAC RMS or 60V DC,
these voltages are considered a shock hazard.
● Always discharge capacitors and remove power from the device under test before performing
diode, resistance, or continuity tests.
● To avoid damage to the meter, do not exceed the maximum limits of the input values shown in the
specification.
● If the device will not be used for a long time, remove the batteries to prevent them from draining.
26
