Idiomas disponibles
Idiomas disponibles
• The use of accessory attachments not recommended by the
manufacturer may result in fire, electrical shock, or risk of injury to
persons.
• Do not use outdoors or for commercial purposes.
• Do not let power cord hang over the edge of the table or counter, or
touch hot surfaces.
• Do not place on or near a hot gas or electric burner or heated
oven.
• Unplug the unit when finished using.
• Extreme caution must be exercised when moving an appliance.
PARTS IDENTIFICATION
1. Handle
2. Stainless steel part
3. Top
4. Open button
5. Aluminum handle
6. Plate
7. Release button
8. Bottom
9. Control panel
06
OPERATIONAL GUIDANCE
• Power Switch①:
* In standby, power switch is on breathing flash state
* In working mode,power switch is lighting
* Touch power switch to turn on the power
* Touch power switch to stop prompt tone
1
* Press 3 seconds to turn off the power
2
• Temperature regulators for upper plate②:
3
* Turn on power,temperature regulators flashing
4
* The machine is working condition,temperature regulators are
5
normal on
6
* Each touch increase/decrease 5℃/41℉
7
8
* Long press continuous increase/decrease
9
• Temperature regulators for lower plate③:
* Turn on power,temperature regulators flashing
* The machine is working condition,temperature regulators are
normal on
* Each touch increase/decrease 5℃/41℉
* Long press continuous increase/decrease
• Temperature display for upper plate④:
* Power on indicates 000℃/32℉
* Temperature setting range 90℃-230℃/194℉-446℉
* After temperature is setting,light flashing three times to start
working
* In working condition,the light is normal on
10
9
8
6
4
2
11
7
5
3
1
07
