Selco BOX BASIC RI 3000 Profinet-IO Instrucciones De Uso página 48

J9-1
J9-8
J9-2
9-6
J9-7
J9-3
J9-4
J9-5
48
4.3.1 Power supply
Wire 1 Connect to +24V direct voltage (IN)
Yellow green wire Connect to the ground contact (PE)
Wire 2 Connect to the ground contact
4.3.2 Digital inputs (DI1-DI2)
Wire 6 MAINTENANCE (DI1): control signal for the safety of the system during
0 = 0V maintenance.
1 = 24V 0 = maintenance protection inactive
1 = maintenance protection active
Wire 7 EMERGENCY (DI2): command signal for total shut-down of the welding
0 = 24V process. For connection to the system's safety devices.
1 = 0V 0 = system in alarm status
1 = system operating normally
The parameters for these digital inputs can be selected and programmed
by FP-RC.
Default: not programmed.
Consult the section "Set-up parameter 400" (Genesis ... repair manual)
4.3.3 Digital outputs (DO1-DO3-DO4)
Wire 3 Programmable digital output DO1
Wire 4 Programmable digital output DO3
Wire 5 Programmable digital output DO4
The parameters for these digital outputs can be selected and programmed
by FP-RC.
Default: not programmed.
Consult the section "Set-up parameter 400" (Genesis ... repair manual)