Idiomas disponibles
Idiomas disponibles
Replacing The Blade
For safety reasons you should have your blade sharpened, balanced and mounted by an authorized service
workshop. For optimum results it is recommended that the blade should be inspected once a year.
Before you remove the grass collection bag, stop the engine and wait until the blade
WARNING!
stops completely.
You will need garden gloves (not provided) and a spanner wrench(not provided) to
WARNING!
remove the blade.
Don't invert the mower. Tip it slightly towards the oil filler pipe before readching under the
NOTE!
deck.
Always handle the blade with care, sharp edges could cause injury USE GLOVES. Renew
WARNING!
If the blade is cracked or damaged replace it with a new one.
WARNING!
Don't hold the blade with your bare hand.
WARNING!
Maintain the sharpness of the blade when cutting grass. If the blade has worn excessively
NOTE!
and become pitted and blunt, it should be replaced or sharpened. The sharpness of the
blade will affect the performance of the lawnmower.
For safety reasons we recommend that the blade only be changed by someone
qualified and authorized to do so.
Hold the blade and unscrew the blade bolt counterclockwise using a spanner
wrench. Remove the washer and the blade.
Fit a new blade or re-sharpen the blade, locate the blade on the two studs on
blade mount and then replace the washer and bolt. Make sure the blade is
correctly located, and then firmly tighten the bolt. Do not over tighten. The
up turn of the blade must project into the mower upper deck.
STORING AND MAINTENANCE
your metal blade after 50Hrs mowing or 2yrs whichever is sooner regardless of condition.
16
Fig 14
