Idiomas disponibles
Idiomas disponibles
3. Once the engine is running, put the starter rope into
the rope guide. As shown in Fig 12
Stopping The Engine
As shown in Fig 13
Release the engine start/stop lever, it will return to its
initial position, the engine will automatically switch off.
To Clean A Flooded Engine
If the engine won't start after you have
NOTE!
pulled the starter several times, the
engine may be flooded with excess fuel. Use following
procedure to clear and start a flooded engine.
1. Release the engine start/stop lever to stop engine.
2. Remove the spark plug, dry it, and then reinstall it.
Install the spark plug carefully by hand,
NOTE!
to avoid cross-threading. After the plug is
seated tighten 1/8 to 1/4 turn with a spark plug wrench
to compress the washer.
3. Pull the engine start/stop lever toward upper handle.
4. Operate the pull start as described above.
OPERATION
13
Fig 12
Fig 13
