Idiomas disponibles
Idiomas disponibles
NOTE: Please be sure to use the accessories provided by our company to install this electric water
heater. This electric water heater cannot be hung on the support until it has been confirmed to be
firm and reliable. Otherwise, the electric water heater may drop off from the wall, resulting in damage
of the heater, even serious accidents of injury. When determining the locations of the bolt holes, it
shall be ensured that there is a clearance not less than 0.2m on the right side of the electric heater,
to convenient the maintenance of the heater, if necessary.
METHODS OF USING
• First, open any one of the outlet valves at the outlet of the water heater, then, open the inlet
valve. The water heater gets filled with water. When water flows out of the outlet pipe it implies
that the heater has been filled fully with water, and the outlet valve can be closed.
NOTE: During normal operation, the inlet valve shall be always kept open.
• Insert the supply plug into the supply socket, the indicator will light up this time.
• The thermostat will automatically control the temperature. When the water temperature inside
the heater has reached the set temperature, it will switch off automatically, when the water
temperature falls below the set point the heater will be turned on automatically to restore the
heating.
34
