Idiomas disponibles
Idiomas disponibles
4. INSTALLATION
4.10 SPD Installation
Tools
1.
Phillips #2 torque wrench bit;
2.
Phillips #2 screwdriver;
3.
Torque wrench;
4.
Multimeter.
Passo a passo sugerido
Suggested step-by-step
1.
Choose which SPD mechanical fixing is the most suitable and fix it
according to your needs according to your choice. See how to do this in the
chapter "INSTALLATION" under the item "Fixing";
2.
The VCL Slim has no polarity. It must be inserted after the main circuit
breaker of the power panel, but before the residual current device (RCD), if
installed;
3.
Connect a L/N wire to one of the VCL Slim terminals;
4.
Connect another wire from the available VCL Slim terminal block to the PE/N
busbar.
CLAMPER Indústria e Comércio S.A.
1
1
www.clamper.com.br
|
16103133
+55 31 3689 9500
L/N ( )
ou
(L/N)
(L/N)
ou
L/N ( )
Page 40 of 44
