Idiomas disponibles
Idiomas disponibles
ENGLISH
H OW TO AS SE M B L E
Please refer to the parts on page 3.
1.
Pusher
2.
Feeding Tube/Lid
3.
Auger
4.
Juice Strainer
5.
Rotating wiper
6.
Bowl with Anti Drip Tap
Wash the parts before first use. The juicer may leak and not turn on if not
assembled properly. Please watch the YouTube video from the link above!
Place the auger into the strainer. Turn and press down on it until it clicks
Ensure that the silicone lip is inserted underneath the bowl properly. Turn the auger
until it is locked in place in order to close the lid.
Assemble the strainer into the rotation wiper, then place this assembly into the
juicing bowl ensuring the red dot
on the strainer is aligned with the red dot
the juicing bowl.
Place the drum lid on to the juicing bowl aligning the red dot
the red dot
on the juicing bowl. Turn clockwise to close, aligning the red dot
the drum lid with the closemark. For easy assembly hold the drum lid by grabbing
the feeding tube and turn clockwise.
Place the bowl on the base so that its arrow lines up with the arrow on the base.
Place the pulp jug under the pulp spout and place the juice jug under the juice
spout as shown in the illustration.
8
For a YouTube video on how to
assemble scan this QR code
or go to this link:
https://www.youtube.com/Fridja
7.
Base
8.
Pulp/Juice Jug
9.
Cleaning Brush
10. Pulp Sieve Filter
11.
Ice Cream Filter
into
place.
on the drum lid with
HOW TO J U I C E
Note
1 - Prepare all your ingredients then plug the power cord into a wall outlet. Press the I
button to operate forwards. Press II button to operate in reverse.
Forward: Pulls down and slowly masticates the ingredients.
Reverse: Pushes the ingredients back up to dislodge them.
2 - Insert the prepared ingredients one piece at a time.
Pay attention to our tips when adding different fruit and vegetables.
3 - Use the anti-drip tap to make mixed juices, stop juice from dripping, or rinse
between different juices.
Juicing with the anti-drip tap closed creates various mixed juice creations when different
fruits and vegetables are selected. After juicing, close the anti-drip tap to stop the
juice from dripping, especially when disassembling the juicing bowl off the
base.
4 - After juice and pulp are completely extracted, switch the unit OFF.
on
If the remaining ingredients in the juicing bowl have not been extracted completely,
the drum lid may not open easily. After each extraction, run the juicer for an
additional 30 seconds to let the juicer extract the remaining pulp.
on
Depending on the ingredients, pour water down the feeding tube to rinse out the
interior of the juicing bowl and then attempt to remove the drum lid.
5 - Clean the juicer immediately.
Leaving your juicer unclean may lead to colouration of the plastics and
unnecessary deterioration. Please wash by hand as soon as possible.
f1900 FRIDJA WHOLE FRUIT SLOW JUICER
For a YouTube video on how to
operate scan this QR code
or go to this link:
https://www.youtube.com/Fridja
9
