Cleaning And Maintenance - Qlima LK 2035 Instrucciones De Uso

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 14
4
40
man_LK2035 ('19).indd 40

CLEANING AND MAINTENANCE

1. Warning: Please shut off the unit and unplug before cleaning.
2. Outer filter, wet curtain assembly cleaning: If there is foreign matter is attaché
on the filter, the wind will be influenced. Clean the filter wet curtain assembly
at least once a month. Remove the wet curtain in order, use detergent and soft
brush, soak with detergent for a few minutes, wash and dry the wet curtain.
3. Tank cleaning: Unplug the power cord, turn the water tank knob to the hori-
zontal direction, pull out the water tank and wipe the water tank with proper
detergent
4. Please use wet cloth to clean the product housing. Do not use water to rinse
the unit. Do not use abrasive cleaning liquids or chemical agents to clean the
product.
5. Installation after cleaning: Install the filter, wet curtain assembly, water tank
and other components in sequence, make sure the installation is correct, plug in
the power, and confirm that the product is working properly.
6. Maintenance: When the product is not used for a long time, unplug the power
plug, package the product and prevent dust from entering the body; ensure
that the wet curtain and the filter are dry before installation, and there is no
water in the water tank; after packaging, store in a dry and ventilated place
Filling notice
1. Fill the water in line with water level. Unplug the unit during refilling.
HOW TO CHANGE BATTERY FOR THE CONTROLLER
1: Pull the battery outward.
2: Put in the new battery with the"+"on the top.
3: Put the battery box in thecontroller
CAUTION
1. Use normal power supply.
2. Do not place objects on the top of the unit. Do not cover the air outlet when in
use and obstructed of front and back in one meter.
3. After filling with water, do not tilt or collide the unit, when you need to move
the unit, push the side surface slowly so as to avoid water splashing out. Do not
overturn the unit in service to prevent accident.
4. The body of the unit may not be place in area with extremely high or low tem-
perature. In hot summer, the water in its water tank is liable to deterioration
with odor and should be changed frequently. In winter, at room temperature
lower than 0 degree, it is necessary to remove the water and clean with dry
towel to avoid frost.
5. In cleaning the outer surface of the unit, wet cloth (or with some detergent)
should be used. Do not use any corrosive cleaner or solvent for this purpose.
Rinsing with water is absolutely not allowed.
1)
1
2)
2
3
29-01-19 11:52
Tabla de contenido
loading

Tabla de contenido