Resumen de contenidos para Brenton Studio Asher
- Página 5 M6 x 25 mm M6 x 25 mm M6 x 25 mm M8 x 25 mm M8 x 25 mm M8 x 25 mm Plastic cap...
- Página 6 M6 x 25 mm M6 x 25 mm M6 x 25 mm M8 x 25 mm M8 x 25 mm M8 x 25 mm...
- Página 11 Attach Back Cushion (A) to Armrests (F) by securing 2 Bolts (H1) to the lower holes of Back Cushion (A) as shown. Do not tighten Bolts fully until you have completed assembl Fixez le coussin dorsal (A) aux accoudoirs (F) en positionnant deux boulons (H1) dans les trous inférieurs du coussin dorsal (A) tel qu'illustré.
- Página 12 Gently pivot the Back Cushion (A) to the upright position. Then fix Back Cushion (A) with 2 Bolts (H1) by Allen Wrench (J). Ensure all the Bolts (H1) are tight with Allen Wrench (J). Faites légèrement pivoter le dossier (A) en position verticale. Fixez ensuite le dossier (A) à...
- Página 13 Press the Plastic Caps (I) into the Arm Rest holes to cover bolts and sit down on Seat Cushion. Sitting on the Seat Cushion applies even pressure on the Gas lift and Star Base and secures them in place. Pressez les capuchons de plastique (I) dans les trous des accoudoirs pour couvrir les boulons et asseyez-vous sur le coussin du siège.
- Página 14 IMPORTANT FOR YOUR SAFETY! During assembly, make sure to tighten all bolts completely to ensure that back is fastened properly. Also, after assembly. check bolts regularly to make sure that they remain completely tightened. You can now enjoy the comfort of your new chair! NOTE: Please keep the wrenches supplied in order to periodically check and tighten bolts.
- Página 19 one (1) one 1 one (1) year Proof of purchas e is required in the form of a receipt (copy or original) to validate warranty. Warranty claims without the receipt may be rejected...
- Página 20 un (1) u n (1) un (1)
- Página 21 uno (1) uno (1) uno (1)