Start-Up Procedure - Work Pro W MD 82 AX Manual De Uso

EN
2.5 Connecting to AC Mains
Connect your mixer to the AC mains power source (power outlet) with the supplied AC power cord.
First, connect the IEC end of the cord set to the IEC connector on the mixer; then, plug the other
end of the cord set to the AC mains.
WARNING: The third prong of this connector (ground) is an important safety feature. Do not attempt
to disable this ground connection by using an adapter or other methods.
2.6 Startup Procedure
Use the following procedure when first turning on your system:
1. Turn down the level of your audio source.
2. Turn down the level controls of the amplifier.
3. Power up the mixer. The display is lighting.
4. Power up the amplifier that is connected to the mixer output.
5. Turn up the level of your audio source to an optimum level.
6. Turn up the level of your mixer to an optimum level.
7. Turn up the Level controls on the amplifier until the desired loudness or power level is achieved.
If you ever need to make any wiring or installation changes, don't forget to disconnect the power cord.
Note: To avoid pop noises when powering down your system, it is recommended that the amplifier used
to drive the loudspeakers be turned off before the other system components.
3.0 Automixer (Explanation)
This functionality allows to set a value (TARGET) marked as maximum level of the channel, and another parameter (GAIN),
which marks the quantity of amplification that the channel needs to reach the TARGET value. This functionality provides
several configurations saccording to the installation requirements. One option will be to set the same TARGET threshold
in all channels in order the all microphones have the same level. Another option will be to set several TARGET values on
each channel in order that these channels will have preponderance over the rest.
This gain correction is made in real time, allowing an autonomous control in the installation without being worried about
the controls once set the desired configuration.
5
User Manual / Manual de uso MD 82 AX