Unpacking Your Unit; Installing Your Unit - Work Pro W MD 82 AX Manual De Uso

EN
1.3 Rear connection characteristics
OUT1 OUT2
G
1 2
1. Remote volume control interface: RS-485 connection interface, used to connect the external commands.
2. 2 linear level balanced output interface.
3. Mix balance input interface.
4. Eight MIC balanced input interface.
5. AC power socket and power switch.
6. Phantom power switch, to provide a capacitor microphone with 48V phantom power.
2.0 Setup

2.1 Unpacking Your Unit

Please unpack and inspect your unit for any damage that may have occurred during transit. If damage
is found, notify the transportation company immediately. Only you can initiate a claim for shipping
damage.
WARNING: Before you start to set up your unit, make sure you read and observe the Important Safety
Instructions found at the beginning of this manual.

2.2 Installing Your Unit

CAUTION: Before you begin, make sure your unit is disconnected from the power source and all level
controls turned completely down (counterclockwise).
To install the machine standard 483 mm (19 inches) audio equipment rack.
48V
ON OFF
MIXING CH8 CH7
G G G G
3
6
48V 48V
ON OFF ON OFF
CH6 CH5 CH4 CH3
G G G G
4
3
User Manual / Manual de uso
48V
ON OFF
CH2 CH1
G G
5
MD 82 AX