ProBreeze PB-AC01 Manual De Instrucciones página 6

Ocultar thumbs Ver también para PB-AC01:
Idiomas disponibles

Idiomas disponibles

LCDI SAFETY PLUG
― ―
WARNING: DO NOT USE YOUR PORTABLE AIR CONDITIONER IF THE TEST OR RESET BUTTONS FAIL
TO OPERATE AS INTENDED.
CAUTION: DO NOT USE THE TEST AND RESET BUTTONS AS AN ON/OFF SWITCH.
CAUTION: DUE TO THE POTENTIAL SAFETY HAZARDS, THE USE OF AN ADAPTER PLUG IS
STRONGLY DISCOURAGED.
For additional safety, your appliance is supplied with a Leakage-Current Detection and
Interruption (LCDI) safety plug. Before using your appliance, follow the instruction listed below to
ensure that the LCDI plug is functioning properly:
Plug the LCDI plug into a grounded power outlet.
Press the TEST button on the back of the LCDI plug. This should trip the plug and cut the
power to the appliance. You should not be able to operate your appliance.
Press RESET button to start using your appliance.
The LCDI plug should be tested periodically by pressing the 'TEST' button the 'RESET' button. If the
'TEST' button does not cause LCDI plug to trip, or if the 'RESET' button will not remain engaged,
unplug the appliance immediately and contact the manufacturer.
PARTS
― ―
Front View
1.
Control panel
2.
Horizontal louvre
3.
Vertical louvre
4.
Body
5.
Casters
10 of 76 | English
Rear View
6.
Holder
7.
Handle
8.
Air inlet grille (up)
9.
Air outlet grille
10.
Continuous drainage cap/continuous water outlet
11.
Bottom drainage cap/bottom water outlet
12.
Air inlet grille (down)
13.
Power cord tidy
14.
Condenser filter
15.
Evaporative filter
Accessories
16.
2*AAA batteries + Remote control
17.
Square connector
18.
Heat exhaust hose
19.
Heat exhaust hose short connector
20. Window sealing board kit (Panel A&B + Clip)
21.
600mm water hose
22. Hinged window fabric sealing assembly
23. Sealing Velcro
English | 11 of 76
loading