Idiomas disponibles
Idiomas disponibles
CLEANING
― ―
WARNING: NEVER LEAVE WATER IN THE WATER TANK WHEN
THE APPLIANCE IS NOT IN USE, MICROORGANISMS CAN
GROW IN STAGNANT WATER, THE WATER TANK SHOULD BE
EMPTIED AND CLEANED REGULARLY.
CAUTION: DO NOT USE ANY ABRASIVE CLEANERS OR
SOLVENTS, AS THIS WILL DAMAGE THE APPLIANCE. DO
NOT ALLOW WATER OR OTHER LIQUIDS TO RUN INTO THE
INTERIOR OF THE APPLIANCE, AS THIS COULD CREATE A
FIRE AND/OR ELECTRICAL HAZARD.
•
Do not attempt to clean the appliance in any other way
than that detailed by the manufacturer.
•
Cleaning and user maintenance shall not be made by
children.
Exterior Cleaning:
•
Clean the exterior surface of the appliance by wiping
it with a soft, damp cloth. Dry the appliance with a soft,
clean cloth.
•
Clean the vents and openings of the appliance regularly
with a vacuum cleaner, using the brush attachment to
avoid any dust build-up.
CAUTION: DO NOT OPERATE THE APPLIANCE WITHOUT THE
FILTER. THIS WILL CAUSE IT TO CLOG UP WITH LINT AND
DIRT AND WILL REDUCE PERFORMANCE. ALWAYS INSERT
THE FILTER SECURELY.
Clean the appliance's evaporator and condenser filter once
every two weeks.
To remove and clean the filters:
1. Grip the first filter by gripping the handle to the left of the
20 of 76 | English
upper air inlet grille and gently remove.
2. Upon removing the first filter the second filter handle will
be exposed. Gently remove the second filter.
3. Use a firm brush and or vacuum cleaner to clean the
filter of any dust and particles.
4. Return both the second filter and then the first filter to the
upper air inlet grille.
Heat Exhaust Pipe Cleaning
1. Remove the heat exhaust pipe from the rear of the
appliance and the respective window sealing assembly.
Allow to cool.
2. Use a soft, dry cloth to clean away any dust, or debris.
3. Return the heat exhaust pipe.
STORAGE
― ―
For long-term storage:
1.
Empty the water tank and leave both the continuous and bottom drainage caps and
drainage plugs off and unplugged.
2.
Run the appliance in fan-only mode on the low fan speed setting for 12 hours to allow the
interior of the appliance to fully dry.
3.
Turn off the appliance, replace both the continuous and bottom drainage caps and
drainage plugs, and unplug the power cord.
4.
Remove the heat exhaust hose.
5.
Remove the batteries from the remote control.
6.
Ensure the appliance and water tank are clean and dry before storage.
7.
Do not kink or wrap the power cord and plug around the appliance, as this may cause the
insulation to weaken or split, particularly where it enters the appliance.
8.
Store the appliance in a safe, clean and dry place, away from direct sunlight and out of
reach of children when not in use. To store your product, we recommend using the original
or a similar sized box.
SAFETY FEATURES
― ―
Anti-Frost Protection
If the internal pipe temperature drops too low the unit will pause. The display will show E4 and the
appliance will initiate anti- frost protection rendering the control panel buttons inactive, apart from
the power button. Once the internal pipe temperature has warmed to above 8°C (46.4°F) the anti-
frost protection will cease, and the appliance will return to operating at the chosen settings.
English | 21 of 76
