Idiomas disponibles
Idiomas disponibles
▶ If preferred, twist the attachment and plug it on.
Rotate the base plate
▶ Undo the two screws on the underside of the unit using the Torx T20 offset
screwdriver.
▶ Rotate the base plate and re-tighten the two screws with the Torx T20 off-
set screwdriver.
▶ Plug the attachment in the desired direction onto the metal bracket of the
base plate.
Instructions for use elements e-motion Dental Motor
4 Installation | 4.2 Installing the instrument tray
25 / 58
