Idiomas disponibles
Idiomas disponibles
The steps for custom setting are as follows:
In the power-on state, when the display shows the speed of 0,
(1) Simultaneously press on/off button and hold level button and for more than 2
seconds, the custom setting interface will pop up;
(2) Press the on/off button to switch the function, and press the level button to enter
the parameter modification interface;
(3) Press the on/off button for parameter selection;
(4) Press and hold the on/off button to confirm and save the parameter. When "---" is
displayed, it will automatically return to the custom setting interface. Alternatively,
press the level button to return to the custom setting interface without saving the
parameter;
(5) Press and hold the on/off button or the level button to exit the custom setting
interface.
If no operations are performed within one minute, the display will automatically exit
the setting interface.
All parameters can only be set when your e-bike stops.
A2 version custom setting:
5.1 Metric/imperial system setting
P1 refers to the metric/imperial system setting option. 00 represents the metric
system (unit: "km/h"), and 01 represents the imperial system (no unit display). In the
parameter modification interface, press the on/off button to select a parameter, and
press and hold the on/off button to confirm and save the parameter. When "---" is
displayed, it will automatically return to the custom setting interface.
5.2 Setting of number of steel magnets for speed measurement
P2 represents the setting option of number of steel magnets for speed measurement.
The adjustable range of the number is: 1~64. In the parameter modification interface,
Metric/imperial System Switching Interface
EN
14
