Idiomas disponibles
Idiomas disponibles
4.5 Battery level indicator
The battery level indicator consists of four segments. When the battery is fully charged,
the four segments will be all on. In case of undervoltage, the outline of the battery
indicator will flash, which means the battery has to be charged immediately.
4.6 Error code indicator
When a fault occurs in the electronic control system of your e-bike, the display will
automatically indicate the error code in the distance area in the format of E0**.
Detailed definitions of error codes are shown in Schedule 1.
When an error code appears on the display interface, please conduct
troubleshooting in time. Otherwise, your e-bike will not work normally.
5. Custom setting
In order to meet the users' needs, there are currently three versions of custom
settings available:
Table 5-1 Functions of each Custom Setting Version
Version
A1
5.1 Metric/imperial system setting + 5.2 Setting of
A2
number of steel magnets for speed measurement
5.3 Rated voltage setting + 5.4 Wheel diameter
A3
Battery Level Indicator Interface
Error Code Indicator Interface
Setting function
N/A
setting + 5.5 Speed limit setting
EN
13
Remarks
/
Setting 1
Setting 2
