Idiomas disponibles
Idiomas disponibles
Two Wheel Kit Installation
1.Install the two wheels on the axle shaft using the plain washers and
split pins.
2.Install the axle assembly on the generator using four 8×16 mm
flange bolts and 8 mm flange nuts.
3.Install the two stands on the under frame using four 8×16 mm
flange bolts.
TORQUE: 24–29 N∙m (2.4–3.0 kgf∙m, 17–22 lbf∙ft)
8×16 mm FLANGE BOLT (8)
WHEEL (2)
STAND (2)
AXLE SHAFT
8 mm FLANGE NUT (4)
LONGER
UNDER FRAME
20 mm
PLAIN WASHER (2)
4×28mm
SPLIT PIN (2)
GENERATOR
SIDE
53
