Idiomas disponibles
Idiomas disponibles
EN
• Always wear safety glasses with side shields
marked to comply with ANSI Z87.1. Obey this
instruction will reduce the risk of serious injury.
• Protect your lungs. Wear a face or dust mask
if the operation is dusty Obey this instruction will
reduce the risk of serious injury.
• Protect your hearing. Wear hearing protection
during extended periods of operation. Obey this
instruction will reduce the risk of serious injury.
• Battery tools do not have to be plugged into
an electrical outlet; thus, they are always
in operating condition. Be aware of possible
hazards when not using your battery tool or
when changing accessories. Obey this instruction
will reduce the risk of electric shock , fire, or serious
injury,
• Do not place battery tools or their batteries near
fire or heat. This will reduce the risk of explosoion
and possibl injury.
• Do not crush, drop or damage battery pack. Do
not use a battery pack or charger that has been
dropped or received a sharp blow. A damaged
battery is subject to explosion. Properly dispose of a
dropped or damaged battery immediately.
• Batteries can explode in the presence of a
source of ignition, such as a pilot light. To
reduce the risk of serious injury, never use
any cordless product in the presence of open
flame. An exploded battery can propel debris and
chemicals. If exposed, flush with water immediately.
• Do not charge battery tool in a damp or wet
location. Obey this instruction will reduce the risk
of electric shock.
• For best results, your battery tool should be
charged in a location where the temperature is
more than 50°F but less than 100°F. To reduce
the risk of serious injury, do not store outside or in
vehicles.
• Under extreme usage or temperature conditions,
battery leakage may occur. If liquid comes in
contact with your sink, wash immediately with soap
and water. If liquid gets into your eyes, flush them
with clean water for at least 10 minutes, then seek
immediate medical attention. Obey this instruction
will reduce the risk of serious injury.
• Keep these instructions. Refer to them
frequently and use them to instruct others who
may use this tool. If you borrow someone this
tool, loan them these instructions also to prevent
incorrect use of the machine and possible injury.
3
SYMBOLS ON THE PRODUCT
Some of the following symbols may be used on this
tool. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you
to operate the tool better and safer.
English
Symbol
V
4
RISK LEVELS
The following signal words and meanings are intended
to explain the levels of risk associated with this
product.
6
Explanation
Voltage
Direct current
Read all safety warnings and all
instructions.
Safety alert
Wear eye protection
Wear ear protection
Low speed
High speed
Do not touch rotating part.
Keep hands away.
