Idiomas disponibles
Idiomas disponibles
CAUTION
If you forget to remove the sandpaper after a
sanding operation, sand for a few minutes to soften
the adhesive backing before attempting to remove
sandpaper.
12.1 CLEAN THE MACHINE
CAUTION
The machine must be dry. Humidity can cause risks of
electrical shocks.
•
Clear the unwanted material out of the air vent with
a vacuum cleaner.
•
Do not spray the air vent or put the air vent in
solvents.
•
Clean the housing and the plastic components with
a moist and soft cloth.
12.2 CLEAN THE DUST BOX
1. Remove the dust bag.
2. Empty the dust bag and clean the dust bag with a
soft brush.
NOTE
For more efficient operation, empty the dust bag when
it is no more than half full. This will permit the air to
flow through the bag better.
13
TECHNICAL DATA
Voltage
No load speed
Orbit diameter
Size of paper
Weight (without battery)
Battery model
Charger model
14
LIMITED WARRANTY
3
LIMITED WARRANTY
GARANTIE LIMITÉE
GARANTÍA
LIMITADA
Greenworks hereby warranties this product, to the
original purchaser with proof of purchase, for a period
English
24 V
-1
11000 min
1.6 mm
1/4 sheet
2.3lbs (1.04kg)
LB24A020/BAG708 and
other BAG series
2978602/2903102 and
other CAG series
YEAR
ANS
AÑOS
of three (3) years against defects in materials, parts
or workmanship. Greenworks, at its own discretion, will
repair or replace any and all parts found to be defective,
through normal use, free of charge to the customer.
This warranty is valid only for units which have been
used for personal use that have not been purchased
or rented for industrial/commercial use, and that have
been maintained in accordance with the instructions
in the owners' manual supplied with the product when
new.
ITEMS NOT COVERED BY WARRANTY:
1. Any part that has become inoperative due to
misuse, commercial use, abuse, neglect, accident,
improper maintenance, or alteration; or
2. The unit, if it has not been operated and/or
maintained in accordance with the owner's manual;
or
3. Normal wear;
4. Routine maintenance items such as lubricants,
blade sharpening;
5. Normal deterioration of the exterior finish due to use
or exposure.
HELPLINE:
Warranty service is available by calling our toll-free
helpline at 1-888-909-6757.
TRANSPORTATION CHARGES:
Transportation charges for the movement of any power
equipment unit or attachment are the responsibility of
the purchaser. It is the purchaser's responsibility to
pay transportation charges for any part submitted for
replacement under this warranty unless such return is
requested in writing by Greenworks.
USA address:
Greenworks Tools
P.O. Box 1238
Mooresville, NC 28115
11
Canadian address:
Greenworks Tools Canada,
Inc.
P.O. Box 93095, Newmarket,
Ontario
L3Y 8K3
EN
