Idiomas disponibles
Idiomas disponibles
Phase 5 | Screen Clip Cover & Cross Beam Cover Assembly
2
3
4
Step 1
Tighten all 8 pre-installed socket screws to
secure the stretcher frame.
Step 2
If there is no screen clip required, just cover the
holes with the screen clip covers.
Step 3
Install the cross beam covers.
Kinex Installation Guide | 28
5
Step 4
Cover the hole with the cross beam side cover.
Step 5
Secure the cross beam cover with three M6*10
screws per side.
amqsolutions.com
Kinex Double Run
1
