Idiomas disponibles
Idiomas disponibles
Phase 4 | Stretcher Bars & Cantilever Assembly
Insert beam
into cross
beam slot
Step 1
Adjust stretcher frame depending on the beam
length selected.
Step 2
Drop in beam into the slot on the cross beam.
If there is electrical accessories, please install it
into the beam first before securing the beam to
the frame.
Kinex Installation Guide | 27
2
3
1
2
1
Step 3
Screw in M6*10 screws to secure beam. There
should be 4 screws per side.
amqsolutions.com
Kinex Double Run
3
