Oster OS-BNFME21600HBI Manual De Instrucciones página 33

Idiomas disponibles

Idiomas disponibles

Avoid it from direct sunlight in out-buildings or sun lounges.
•Leveling
Make sure to level your refrigerator/freezer using the front leveling feet. If not level, the
refrigerator/freezer door gasket sealing performance will be affected, or even it may lead
to the operating failure of your refrigerator/freezer.
After locating the refrigerator/freezer in position, wait for 4 hours before using it, so as to
allow the refrigerant to settle.
•Installation
Do not cover or block the vents or grilles of your appliance.
When you are out for a long time
• If the appliance will not be used for several months, turn it off first, and then unplug the
plug from the wall outlet.
• Take out all foods.
• Clean and dry the interior thoroughly. To prevent odor and mold growth, leave the door
ajar: block it open or have the door removed if necessary.
• Keep the cleaned appliance in a dry, ventilated place and away from the heat source,
place the appliance smoothly, and do not place heavy objects on top of it.
• The unit should not be accessible to child's play.
MAINTENANCE AND CLEANING
Before cleaning, unplug the power plug first; Do not plug in or plug out the
plug with wet hand, because there is a risk of electric shock and injury. Do
not spill water directly on the refrigerator, to avoid rust, electricity leakage and
accidents. Do not stretch your hands into the bottom of the refrigerator, since you
might be scratched by sharp metal corners.
Internal cleaning and external cleaning
The food residuals in the refrigerator are liable to produce bad odor, so the refrigerator
must be cleaned regularly. The fresh food compartment is usually cleaned once a
month.
Remove all shelves, crisper box, bottle racks, cover board, and drawers etc., and clean
them with a soft towel or sponge dipped in warm water or neutral detergent.
Clear off the dusts accumulated on the rear panel and side plates of the refrigerator
often.
After using detergent, be sure to rinse it with clean water, and then wipe it dry.
Do not use bristle brush, steel wire brush, detergent, soap powder,
alkaline detergent, benzene, gasoline, acid, hot water and other corrosive
English-14
loading