Idiomas disponibles
Idiomas disponibles
F U NCT ION S
The display panel is designed on the fridge door,
illustrated as the figures below:
Function Setting
When the refrigerator system is connected to
power supply for the first time, all icons on the
display panel gets illuminated for 2s, and the
system runs in the Smart mode by default. When
all the doors are close, the display gets extingui-
shed automatically if no key operation within 3 minutes. When the display is off, it will
light up if any door is opened or any key is pressed.
The following key operations are valid only when the keys are unlocked and gets
illuminated on the display.
"Inverter" is the frequency conversion indicator. When the power is turned on, it lights up
when the compressor is working.
1.Functions
1.1 Temp. setting
1） Fridge temperature setting
Press the Temp. Zone key to select the fridge zone until the corresponding icon gets
flickering, and then press the Temp. key to set the temperature as desired, finally, press
the OK key to validate the setting.
The fridge temperature setting cycles as following:
5℃→6℃→7℃→8℃→OF→2℃→3℃→4℃→5℃
OF indicates the fridge is switched off, and when the OF function takes effect, the fridge
will stop cooling.
Be sure to take all foods out of the fridge compartment before setting this function.
2） Freezer temperature setting
Press the Temp. Zone key to select the freezer zone until the corresponding icon gets
flickering, and then press the Temp. key to set the temperature as desire, finally press
the OK key to validate the setting.
The freezer temperature setting cycles as following:
-18℃→-17℃→-16℃→-24℃→-23℃→-22℃→-21℃→-20℃→-19℃→-18℃
1.2Fast Freeze
1)When the Fast Freeze function is enabled, the freezer temperature will be controlled
at -32℃ automatically, and after 26 hours of running, the Fast Freeze function gets
exited. Cooling down the freezer temperature in a rapid manner is beneficial to the
English-9
