Idiomas disponibles
Idiomas disponibles
Unlock the tank latches (4) and empty the tank (5).
WARNING! Always operate the product in an upright position to ensure
the safety valve operates properly.
Operation
1. Check the product, battery as well as accessories for damage before each use. Do
not use the product if it is damaged or shows wear.
2. Double check that accessories or attachments are properly fixed.
3. Always hold the product by its handle. Keep the handle dry and clean to ensure
safe support.
4. Switch the product off immediately if you are disturbed while working with it
and when other people enter the working area. Always let the product come to
complete stop before putting it down.
5. Do not overwork yourself. Take regular breaks to ensure you can concentrate on
the work and have full control over the product.
01
Dry/wet vacuuming (Fig. N)
This product is designed for dry and wet vacuuming.
1. Assemble the product according to the required operation.
2. Attach the desired accessories.
3. Switch the product on by setting the on/off switch (2) to its I position and hold the
hose handle firmly.
4. Keep the nozzle on the working surface in front of you.
5. Move in slight overlapping rows. The most effective pattern is straight lines along
one of the sides. This will keep the rows even and ensures that the entire working
surface is cleaned up without missing any spots (Fig. N).
6. During wet vacuuming, check the water level in the tank regularly. Empty the tank
regularly when large quantities of water are to be vacuumed.
02
Blowing
This product is designed for light blowing.
1. Assemble the product according to the required operation.
2. Attach the desired accessories onto the hose.
3. Switch the product on and hold the hose handle firmly.
4. Hold the hose approx. 10 cm above the target surface and move slowly forward
using a sweeping motion from side to side.
5. While working, ensure that the product does not strike hard objects, as this can
cause damage.
MNL_ERBAUER_18 V vacuum cleaner_ETBV18-Li_IMGB_V1_220127.indd 23
23
1/27/22 3:45 PM
