ENGLISH
the risk of wire breakage, on the contrary, you shall use hands to hold the body to take the
machine out and then assemble it.
When assembling, the wire needs to be put into the slot and then inserted. Do not assemble it
forcibly, otherwise the wire may be damaged.
Fig. 2.
When fixing the screws, use the original screws to avoid damage to the body.
Installation of charging adapter
After the machine is placed, take out the packaged adapter, insert the male end connector into
the female end socket at the bottom of the back of the machine body, and connect the power
plug to the power supply before charging.
Fig. 3
Note: The length of the adapter cable is limited. Please charge within the cable length scope to
avoid poor contact with the charging cable.
4. OPERATION
Charging and charging display
During use, the indicator light turns red and the machine stops working when battery is low.
After plugging in the power, when the indicator light is red, it indicates that the device is
charging. When the indicator light turns from red to green, it indicates that the machine is fully
charged.
If the product is not unplugged, it will stop charging and the indicator light will remain green to
remind the user that the battery is full.
The charge time is about 4-5 hours. Once the device is fully charged, unplug it from the power
supply.
Note: When using this product for the first time, the battery will be low. It can be used normally
after fully charged. During the first three uses, the recommended charging time is about 12
hours. After the complete charge and discharge, the product can be charged normally.
Using the electric mop
After removing the device from the charging base, press the On/Off button on the handle
assembly to start and stop operation.
Press and hold the water spray button to spray water from the front nozzle of the rolling
brush. Wet and wipe the floor with the front rolling brush and dry and wipe the ground with
the rear rolling brush. After releasing the button, it will stop spraying.
Water tank assembly and disassembly
37
CONGA POPSTAR 14800 AQUA