Idiomas disponibles
Idiomas disponibles
ENGLISH
Regulatory Information
USA
Contains FCC ID: XPYANNAB1
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and,
(2) this device must accept any interference received, including interference that may cause undesired operation. This
equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that the interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna
•
Increase the separation between the equipment and receiver
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Caution Any changes or modifications NOT explicitly APPROVED by GAIM Immersive Technology Group AB may void
the user's authority to operate the equipment.
Regulatory Information
Canada
Contains IC: 8595A-ANNAB1
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two
conditions:
(1) This device may not cause interference; and,
(2) this device must accept any interference, including interference that may cause undesired operation of the device
RF Exposure information
IC compliance
This equipment complies with the requirements of IC RSS-102 issue 5 radiation exposure limits set forth for an uncon-
trolled environment. Having a separation distance of minimum 10mm between the user and/or bystander and the anten-
na/or radiating element ensures that the output power (e.i.r.p) of GAIM VR QH1 is below the SAR evaluation exemption
limits defined in RSS-102 issue 5.
FCC compliance
This device complies with the radiation exposure limits set forth for an uncontrolled environment. The maximum output
power of GAIM VR QH1 is below the SAR test exclusion limits presented in KDB 447498 D01v06 applicable for separa-
tion distances between 0 and 5 mm. Therefore, SAR evaluation is not needed.
10
English
Disposal and recycling
When this product has reached the end of its useful life,
dispose of it according to local laws and regulations. For
information about your nearest designated collection
point, contact your local authority responsible for waste
disposal. In accordance with local legislation, penalties
may be applicable for incorrect disposal of this waste.
Europe
This symbol means that the product shall not be
disposed of together with household or commer-
cial waste. Directive 2012/19/EU on waste electrical and
electronic equipment (WEEE) is applicable in the Euro-
pean Union member states. To prevent potential harm
to human health and the environment, the product must
be disposed of in an approved and environmentally safe
recycling process. For information about your nearest
designated collection point, contact your local authority
responsible for waste disposal. Businesses should con-
tact the product supplier for information about how to
dispose of this product correctly. This product complies
with the requirements of Directive 2011/65/EU on the
restriction of the use of certain hazardous substances in
electrical and electronic equipment (RoHS).
Warranty
This Warranty covers defects and malfunctions in the GAIM product(s) it accompanies and does not affect the
mandatory consumer protection and/or product liability legislation. We warrant that the GAIM product will, under
normal and intended use, function substantially in accordance with our technical specifications or accompanying
product documentation (the "Warranted Functionality") during the Warranty Period.
If and to the extent the GAIM product needs GAIM software or services to achieve the Warranted Functionality, we will
make and keep software and services available during the Warranty Period. We may update, modify or limit such
software and services in our sole discretion so long as we continue to maintain (or exceed) the Warranted Functionality.
Product registration is not required as a condition to coverage under this Warranty, but GAIM products require periodic
connection to an online GAIM account to ensure full functionality.
This limited Warranty continues for one (1) year from the date of purchase or delivery of the GAIM product, whichever
is later (the "Warranty Period"). However, if you purchase the Product from within the EU or EFTA, the Warranty Period
shall be two (2) years.
To claim defect or malfunction, send a photo or video and weapon controller with written description of the problem to
the contact as described on www.gaim.com/support
Warranty does not cover accidents while using the product, improper care, non-intended use or lack of
service/maintenance of the product.
ENGLISH
Label information
The product label can be found on the back side of the
trigger unit. To access the label, remove trigger unit
from wooden stock by unscrewing the two screws
holding the trigger unit in place.
Contact information is available on www.gaim.com
English
11
