Luna AN 1.6 Manual De Instrucciones página 12

6
4
5
Pos
.
1. Fixing nut 5. Lever
2. Punch 6. Air inlet - swivelling
3. Air pad 7. Lubrication nut
4. Air outlet 8. Speed control
English
Art. No.
Type ..........................................................................................
Cutting capacity in steel plate ............................................mm
Cutting capacity in aluminium plate ..................................mm
Cutting speed ........................................................... stroke/min
Chutting width ....................................................................mm
Sound level (PNEUROP PN8NTC1) ............................dB(A)
Vibration (ISO 8862) ........................................................ m/s
Min. hose size ................................................................... inch
Air inlet ...........................................................................G(R)
Air consumption at 100% int.* ........................................l/min
Air consumption at 40% int.* ........................................l/min
Air consumption at 100% int.* ..........................................cfm
Air consumption at 40% int.* ..........................................cfm
Weight .................................................................................. kg
Punch .............................................................................. 20735
Air pad ............................................................................ 20735
*At 6.2 bar
8
20735
2
22
7
A comfortable and smoothly nibbling machine designed for different purposes of app-
lication. Designed for use with plane and corrugated materials like thin tin plate and
aluminium. Allow working in narrow places. Equipped with safety lever (Pos.5) and
adjustable air pad (Pos.3) 360°. Rear exhaust (Pos.4). Cutting speed can be adjusted by
use of speed control (Pos.8).
The tool is delivered as standard with punch (Pos.2) and air pad (Pos.3).
1
3
• User of the tool should always take care of his and other persons' safety. The user
2
must always use personal protective equipment.
• Wear safety goggles, in order to reduce risk of eye injuries that could be caused by
flying sawdust, dust and sparkles.
• Inhalation of dust can be harmful to health. Wear a suitable visor or breathing appa-
ratus, when working in a dusty environment.
• In case of continuous work wear safety gloves protecting against the cold air.
• In order to avoid eventual aural injuries, always use ear protection when using the
tool.
• The user must always pay attention to the fact that continuous use of rotating and
impact producing manual tools could result in baneful influence on health caused by
the vibration.
-0109
• Ergonomic load: Work with the tools related to recurrent, monotone movements
AN 1.6
and uncomfortable body positions may cause back, scruff, arm, knee and other joint
1.6
injuries.
1.6
2 500
4
90
4.3
3/8
1/4
540
216
19.1
7.6
0.9
-0406
-0505
Description
Health hazards
23