Deltaco SH-IPC09 Manual Del Usuario página 8

ENG
Thank you for choosing Deltaco!
1. Speaker
2. Passive infrared sensor
3. Camera lens
4. LED
5. Reset button
6. Light sensor
7. USB Micro-B charge port
8. LED (charge status)
9. Microphone
10. MicroSD slot
The camera has a built-in battery. Use the
USB cable to charge.
To power on/off, press and hold the button
for 3 seconds to turn the camera on or off.
Mounting
This product has 2 different brackets
for mounting. Choose a bracket for your
needs.
Bracket (B) is commonly used outdoors.
Bracket (A) is popular because it is using
a magnet.
Drill holes in the wall or ceiling for the bracket.
Mounting (A)
8
Mounting (B)
B. Adjust the camera angle by aiming and
rotating it. Fasten the screw.
Reset
Press and hold about 5 seconds for reset.
Any changed settings will change to
factory default.
LED status
Camera LED
Red = the camera is just turning on or there
is something malfunctioning.
Flashing red = waiting for WiFi connection.
Flashing red fast = connecting to WiFi.
Blue = connected.
Charge LED
Red = charging.
Blue = Fully charged.
ONVIF
For use of ONVIF, please check the prod-
uct's page on Deltaco's website.
Install and use
1. Download and install the app "Deltaco
smart home" from Apple App Store or
Google Play Store on your mobile device.
2. Launch the app "Deltaco smart home".
3. Create a new account or log in to your
existing account.
4. Tap "+" to add the device.
5. Choose category and then the type of
product from the list.
6. Connect the device to power.