Stalgast 801350 Instrucciones De Uso página 34

6.4. Electronic elements
1. Control panel
2. Button functions
Start button
Set button
Down arrow
Up arrow
Stop button
3. Displays
19
9 22
4. Parameter setting
After the first pressing of
password.
a. programming of temperatures and times
CUSTOMER SETTINGS
SET
Press
temperature (70-95
The
• turns the device on
• Pressing the button with the door open, launches the STOP func-
tion. You can then close the door without starting the washing
cycle. To turn the function off, press the button again
• confirmation of the introduced input data, setting of the password
• access to data setting: P1, P2, P3, P4, P5, P6
SET
• reduces the washing or rinsing temperature
• drain pump (optional)
• increases the washing or rinsing temperature and increases the
duration of the wash or rinse cycle. C1-90 sec. C2-120 sec. C3-180
sec.
• turns the device off (does not disconnect the device from power
supply, the complete disconnection of the device occurs after the
plug is removed from the socket or the main external switch is
turned off ), stops the washing and rinsing process
display 1 – indicates the rinsing and sanitization temperature; washing cycle length C1 – C2 – C3
display 2 – indicates the washing temperature
SET
arrows to change the data on display 2 into:
again. The displays will show the following data:
o
C)
arrows can be used to adjust the temperature on display 2.
the display will show
- 34 -
. Use the
. This is the factory-set
- sanitization-rinsing