Idiomas disponibles
Idiomas disponibles
INSTALLATION GUIDE
5
STEP 6
Sanitize and Install Water Tank Valve
1. Using the included eye dropper, add 3ml bleach into
the top of the water tank.
Note: Sanitation step will be completed during the
pressure test and flush step of the installation.
2. From the accessories box, find the water tank valve.
3. Screw the water tank valve onto the stainless-steel
connector located on top
of the tank.
Note: The valve is pre-wrapped with plumber's tape
which will help seal the threads to prevent leaks.
4. Hand tighten water tank valve until secure (be sure
not to cross-thread or over-tighten). After you have
secured with hand tightening, tighten with wrench a
quarter turn to ensure secure fit.
STEP 7
Connect Water Tank to System Manifold
1. Open water tank valve. Valve should be
pointing towards the valve port.
2. Insert one end of the yellow tubing into
the water tank valve.
3. Place water tank on the tank stand in an
area that is near the system manifold.
4. Connect water tank to the system manifold.
Do so by connecting the other end of the
yellow tubing to the yellow inlet port on the
backside of the system manifold, labeled, 'tank'.
NEED HELP? GIVE US A CALL 877.333.7108
Turn to the right
CLOSED
OPEN
