Idiomas disponibles
Idiomas disponibles
Project Your TC004 Screen to PC
1.
To project your TC004 screen to PC, you need to switch your
TC004 to USB mode first (Go to Setting > System Setting, and
tap Using Mode to switch to USB mode).
2.
Open the TDView software and you can screen project your
TC004 thermal imaging camera to PC.
Imagery Analysis on PC
Once your TC004 is connected to PC via the supplied USB cable, you
can send files (both JPG and IRG format files required) to the PC and
conduct imagery analysis with the TDView software.
Note: Screen projecting and imagery analysis features cannot
be available at the same time.
EN I 11
