Idiomas disponibles
Idiomas disponibles
• Clean and dry the area of
the windshield where you
will mount the suction cup.
• Press the suction cup firmly
onto the windshield. Then
press the lock latch down to
secure it and the CDC-560
in place.
• Plug the mini USB end of
the provided power cable
into the Mini USB port of the
CDC-560. Plug the other
end into the cigarette port of
your car.
POWER ON/OFF
When plugged into your car, the CDC-560 will automatically power
on when the car is powered on and automatically power off when
the car is powered off. To manually turn the dashcam on/off, press
and hold the "Power" button. Note: The CDC-560 comes with a
built-in battery that contains just enough power to save any ongoing
recordings. As a result, the dashcam will remain on for a few
additional seconds after the car has been powered off.
RECORDING
The CDC-560 will automatically enter Recording Mode and begin
recording after being powered on. This is indicated by both the
flashing blue LED indicator and the flashing red recording icon on
screen. Recording will automatically stop when the car is turned off.
To manually start or stop recording, press the "Ok" Button.
CAMERA MODE
Camera Mode allows you to take photos with the dashcam, which
are saved to the micro SD card. To enter Camera Mode, press the
"Mode" Button once while in recording mode. To take a photo,
press the "Ok" Button.
4
Hide the power cable by placing (Wedging)
it in the space between the windshield and
the headliner.
