Idiomas disponibles
Idiomas disponibles
EN
10
Installation
•
The product should be installed by 2 skilled persons.
•
To avoid vibration and noise, make sure the product is installed
securely and firmly.
•
The window should be able to withstand the weight of the product.
•
Install the product where the sunlight does not directly shine on it. If
the product receives direct sunlight, build an awning to shade it.
•
The rear part of the product must be installed outdoors, not inside a
building, garage or another room.
•
There should be no obstacles, such as a fence or wall, within 20"
(50 cm) from the back of the product and the side louvers. Obstacles
might limit the heat radiation, which greatly reduces the cooling
efficiency of the product.
•
Install the product with its bottom portion approx. 30-60"
(75-150 cm) above the floor level.
•
Install the product within a reach to the wall outlet.
CAUTION
Risk of cuts! When handling the product be careful to
avoid cuts from sharp metal edges.
Step 1
K
F
•
Attach the top rail (F) with 4 screws (K) by following the pre-drilled
holes on the unit.
