Idiomas disponibles
Idiomas disponibles
The marked "OK" box is a safe area for the operator working with the
•
machine. The arrows indicate the direction (area) of material processing in
the machine.
•
Avoid standing directly in front of the opening of the hopper - risk of
kickback. Do not put your hands into the hopper!
3.4.
Cleaning and maintenance
a)
Before each cleaning, adjustment or replacement of accessories, and when the
unit is not in use, turn off the machine and cool it down completely, also
remove the ignition cable pipe from the spark plug.
Wait until the rotating parts stop.
•
b)
Use only non-corrosive cleaning agents for cleaning the surfaces.
c)
Store the unit in a dry and cool place protected from moisture and direct
sunlight.
d)
Do not spray the unit with a stream of water or immerse it in water.
e)
Make sure that no water enters through the ventilation openings in the casing.
f)
Clean the ventilation openings with a brush and compressed air.
g)
Perform regular inspections of the unit checking technical fitness and any
damages.
h)
Do not use sharp and/or metal objects (e.g. wire brush or metal spatula) for
cleaning as they may damage the surface of the unit material.
DISPOSAL OF USED UNITS.
At the end of its useful life, this product should not be disposed of with normal
household waste but should be taken to a collection point for the recycling of
electrical and electronic equipment. This is indicated by the symbol on the
