hillvert HT-HECTOR-100A Manual De Instrucciones página 25

3.3.
Working with the device
Press the green button "I" on the control panel:
•
Wait a very brief moment for the unit to reach full speed.
•
Chipping can start.
•
IMPORTANT: never throw in items to be processed before starting the
machine!
ATTENTION: in the event of blocking the grinding mechanism, the "RESET"
safety switch will disconnect the motor to protect it from damage. In this
case, after removing the obstacle (be sure to turn off the power first), turn
the machine on again. Before turning the unit on, first press the "RESET"
safety button.
After finishing work and before switching off the machine, wait until the
•
last piece is completely processed.
• Turn off the machine with the red button "O" on the control panel.
Disconnect the power cord from the machine when not in use.
•