Ruby VCI 800 Manual De Instrucciones página 14

INSTRUCTION MANUAL
CONTROL PANEL
Insert the plug pin into a wall socket and turn on the power switch which is at the side of the unit.
A small beep sound can be heard and the power indicator will be on.
ON / OFF: Press once this button to make the unit ready for working. It will start up with MID in 3 seconds and
then revert to work under the memorized status. If for first time use, it will start up with MID in 3 seconds and
then work with LOW. Press again this button to turn OFF.
SPEED: Press this button to select desired fan speed, LOW—MID—HIGH—LOW, in turn. at the same time can
digital display 1.2.3.
WIND: Press this button to select desired wind mode, NATURE—SLEEP—NORMAL¬NATURE, in turn.
The corresponding wind mode indicator will be displayed.
(1) NORMAL: It works as per the selected fan speed (HIGH, MID, LOW).
(2) NATURE: It works as per the presetted computer program, imitating the natural irregularly wind.
(3) SLEEP: It works as per the presetted computer program, alternating between different fan speed.
C) If it is selected HIGH, the unit will work under HIGH NATURE wind mode for half an hour, then revert to
work under MID NATURE wind mode for half an hour and then revert to LOW NATURE wind mode.
If it is selected MID, the unit will work under MID NATURE wind mode for half an hour, then revert to LOW
NATURE wind mode.
If it is selected LOW, the unit will work under LOW NATURE wind mode.
SWING: Press once this button to make horizontal swing of vertical louvers, the SWING indicator will be
displayed. Press again for fixed air direction. To directing vertical airflow, adjust the horizontal louvers manually.
COOL: Press once this button to start the evaporative cooling function. Press again this button to cancel.
IONIZER: Press once this button to release negative ions into the air, to freshen the air and care health. Press
again this button to cancel.
TIMER: It can be set between 1to 24 hours, increased by 1 hours intervals.
12
RUBY VCI 800
(Remote controller control
panel with the same function
as the unit control panel).